Tools & Files needed for update:
Click here to download Firmware file
Click here to download Bennett v1.0.ops file
Click here to download Odin Downloader
Before ugrading:
1)- Take backup of Contacts. Go to Contacts > Press Menu button > Click on More > Import/Export > Export to SD card > Confirm by pressing Yes.
2.)- Take backup of your messages. For this you need an application like SMS backup & Restore Pro.
3.Take backup of the installed applications. For this you need to use a file explorer application like ES File Explorer.
4)- Take backup of current settings and application data. Go to Settings >Privacy settings > Put a check mark on Back up my data and Automatic Restore.
5)- Shut down your Galaxy pro and remove SD card and SIM card. (Don’t Power On your galaxy pro)
Procedure:
1. Unzip and extract the files that you have downloaded to a specific folder.
2. Run Odin downloader.
3. Put a check mark on Auto reboot and Protect OPS.
4. Click on OPS to browse and select the OPS file. You need to go the destination folder where you have extracted Bennett_v1.0 ops file.
5. Put a check mark on One Package and browse and select the firmware file in the last box that is ONE PACKAGE. You will get the following message once firmware file is checked :
Check MD5 FileName…
MD5 File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar
Open File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar
Check MD5 …
Tail MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E
Image MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E
Check MD5 … ok
6. Press Power and Q button simultaneously to enter in Download mode.
7. Once you are in the Download mode, connect it to USB data cable and wait for ODIN to detect the phone. Once detected, the COM PORT 1 MAPPING box will become yellow and the phone’s port will be detected. In the message section, you will get the following message:
Check MD5 FileName…
MD5 File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar
Open File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar
Check MD5 …
Tail MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E
Image MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E
Check MD5 … ok
<1> Added!!!
<1> Detected!!!
8. Now click on start. Wait until the green bar in the first box reached to the end. It will reboot your Galaxy Pro twice or thrice.
9. Once done, it will give a message as PASS in the COM PORT box as well as message section.
10. Disconnect the phone from USB. Go to Settings > About Phone and check the Firmware Version.
11. Restore the phone back to factory settings to wife off the data. To do it Go to Settings > Privacy settings > Factory Data reset.
12. Once it restarts, shut it down again and insert SD card and SIM card and now your Samsung Galaxy Pro is just like a brand new handset with android gingerbread.
13. You can follow this article if you want to setup up phone for the first time.
Warning: Make sure your cell is fully charged while doing this and take proper back up of apps, contacts and SMS before trying this. As we mentioned, we have done successful upgrades on 10 handsets and all of them are working fine. If you face any problem you can write it in comment, we will help you out. Do at your own risk. We will not be responsible if you end up screwing your phone.
What\'s new in Gingerbread 2.3.6 update:
1)- Smoother and faster UI.
2)- New Music player with better thumbnail previews.
3)- New smart icons.
4) A “Download” app in app menu.
5)- Firewall- IP firewall in settings.
6)- New font.
7)- New cut, copy and paste icons instead of textual options.
